|
Analog I/O Simulator
|
|
Just need a small analog simulator to connect up to analog inputs and outputs?
We have the solution for you. The unit comes pre-wired in a control box ready
to wire in and run with any PLC/controller. It comes with a 24 VDC wall mount
power supply along with a small DC regulator circuit in the box to provide
0-5 VDC output on the potentiometers.
|
|
|
The trainer contains the following items.
|
|
2
|
0-10 VDC Voltmeters
|
|
2
|
Ten turn potentiometers, setup to put out 0-5 VDC
|
|
1
|
24 VDC Wall Mount Power Supply to power up the simulator and
provide 300 mA for customer use
|
|
1
|
3 ft. Cable ready for you to wire into your PLC/Controller
|
|
|
This item is available only via this Web Site. To order, please fill out the order form.
|
|
For more information, please fill out our help request form.
|
Just need a small analog simulator to connect up to analog inputs and outputs?
We have the solution for you. The unit comes pre-wired in a control box ready
to wire in and run with any PLC/controller. It comes with a 24 VDC wall mount
power supply along with a small DC regulator circuit in the box to provide
0-5 VDC output on the potentiometers.