PID Training
|
PID Training
|
|
InterConnecting Automation is proud to announce the start of their new PID class to enhance and challenge your knowledge. This class as with the PLC class will include the expert instruction of Doug Bell. He will team up with Cecil Smith a 30 years plus expert in PID function. You will spend three days in an intense class strictly devoted to PID function. This specialty class will give you use of state of the art equipment along with two instructors at your disposal.
This PID class will educate you on the short cuts and tools that the experts know & use. In addition, you will learn to setup, tune, troubleshoot and debug PID loops. It won't stop there, you will experience adjusting the gain, reset, rate, and many other PID parameters, to see how they affect the loop.
If this is a class that you would be interested in attending please email us your name, address, and phone number. InterConnecting Automation will then contact you with information on this outstanding, challenging specialty class.
The following will be covered:| Terms | Errors | Alarms |
|---|---|---|
|
Setpoint Variable Process Variable Bias Term Bias Freeze Sample Rate Integral Action Derivative Action Direct Acting Reverse Acting Process Dynamics First order lag Dead Time First order lag plus dead time Feedforward Major Loop\Minor Loop Time Proportioning PID Error Squared Manual - Auto - Cascade Modes Bumpless Transfer Ramp Soak mode Accuracy Repeatability Linearity |
Zero Error Span Error Nonlinear Error Combined Zero and Span Error Hysteresis and Dead Band |
Limit Alarms vs. Deviation Alarms Rate of Change |
| Control Strategies | Adjustments | PID flow applications |
|
On-Off Control of heating Proportional Control Proportional Action Proportional Control of a continuous process Level Control Offset Temperature Record - PI Control |
Thermocouple Junction Compensation Thermocouple Calibration Arrangement |
Position vs. Velocity Loops |